Uniden DCT738 - Manual (Page 48)

47
Deleting Your Personal Greeting
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.
With.the.phone.in.standby,.press.[greet].
While.the.personal.greeting.is.playing,.press.[ ].
The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.
Setting the Record Time (or Announce Only)
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to.“.minute”.or.“4.minutes”.to.limit.
the.time.for.incoming.messages..If.you.set.the.record.time.to.“Announce.only,”.the.answering.system.answers.the.
call.but.prevents.callers.from.leaving.a.message.
From the base From the handset
Press.[menu/clock].four.times..The.base.
displays.the.current.number.of.rings.recording.
time.(.minute,.4.minutes,.or.A.for.announce.
only).and.announces.the.setting.
Press.[ /select].or.[ /select]..until.the.
desired.message.record.time.appears.
Press.[set].to.select.the.new.recording.time..
A confirmation tone sounds, and the system
announces.the.new.record.time
.
2.
3.
Press.[menu/clear]...Select.the.ANSW..SETUP.
menu,.and.then.the.RECORD.TIME.submenu.
Move.the.cursor.to.select.RECORD.TIME.(.
MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
Press.[select/ ]
. You will hear a confirmation
tone..
.
2.
3.
While.your.answering.system.is.set.to.Announce.Only,.the.message.counter.LED.on.the.base.displays.“A.”.If.you.
are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.is.
available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.that.
greeting.
.
2.
3.