Uniden DCT738 - Manual (Page 14)

3
Plug.the.telephone.line.cord.into.the.TEL.LINE.jack..
Plug.the.telephone.cord.into.the.telephone.jack.
Align.the.mounting.slots.on.the.base.with.the.mounting.
posts.on.the.wall..Then.push.in.and.down.until.the.phone.is.
firmly seated.
Installing the Battery
Follow.the.steps.below.to.install.the.handset.battery.
1. Press in on the handset battery case cover (use the finger
indention.for.a.better.grip).and.slide.the.cover.downward.to.
remove.
2.. Place.the.battery.pack.in.the.battery.compartment.
with.the.connectors.on.the.battery.and.on.the.
compartment.aligned.
3.. Place.the.battery.case.cover.back.on.the.handset.and.
slide.it.upwards.until.it.clicks.into.place..
Note: Use only the Uniden BT-1004 rechargeable
battery pack supplied with your cordless
telephone.
5.
6.
7.