Setting the number of rings, Setting.the.number.of.rings – Uniden DCT738 User Manual

Page 45

Advertising
background image

44

From the base

From the handset

Press.[menu/clock].six.times.

The.current.setting.(“E”.English,.“F”.French,.
or.“S”.Spanish).appears.on.the.base,.and.it.is.
announced.(“English”.English,.“Français”.French,.
or.“Español”.Spanish).

Press.[

/select].or.[

/select].to.select.the.

language.

Press.[set]

. A confirmation tone sounds, and

the.system.announces.the.new.setting.in.the.
selected.language.

.

2.

3.

4.

Press.[menu/clear]..Select.ANSW..SETUP,.and.
then.the.LANGUAGE.submenu.

Move.the.cursor.to.choose.ENGLISH,.
FRANÇAIS.(French),.or.ESPAÑOL.(Spanish).

Press.[select/

]

. You will hear a confirmation

tone.

.

2.

3.

Setting the Number of Rings

The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.
avoid.long.distance.billing.charges.

From the base

From the handset

Press.[menu/clock].three.times..The.base.
displays.the.current.number.of.rings.(2,.4,.6,.or.
TS.for.toll.saver).and.announces.the.setting.

Press.[

/select].or.[

/select].until.the.

desired.ring.time.appears.

Press.[set]

. A confirmation tone sounds, and the

system.announces.the.new.ring.time..

.

2.

3.

Press.[menu/clear]..Select.the.ANSW..SETUP.
menu,.and.then.the.RING.TIME.submenu.

Move.the.cursor.to.select.a.ring.time.(TOLL.
SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).

Press.[select/

]

. You will hear a confirmation

tone..

.

2.

3.

Advertising