Registering dcx730 or dcx750 handsets, Registering dcx640 or dcx700 handsets, Resetting handsets – Uniden DCT738 User Manual
Page 21: Resetting.handsets
20
Registering DCX730 or DCX750 Handsets
To.register.DCX730.or.DCX750.handsets,.simply.place.the.accessory.
handset.in.the.base..While.the.handset.is.registering,.HANDSET.
REGISTERING.will.appear.in.the.LCD..When.REGISTRATION.
COMPLETE.is.displayed,.the.handset.has.been.registered.to.the.base..
If.REGISTRATION.FAILED.appears,.remove.the.handset.from.the.base.
and.try.again.
Registering DCX640 or DCX700 Handsets
On.the.base,.press.and.hold.
[flash].until.the.CHARGE.LED.starts.
to.blink.
On.the.handset,.press.and.hold.[#/ ].until.you.hear.a.beep.
While.the.handset.is.registering,.HANDSET.REGISTERING.
appears.in.the.display..When.the.display.shows.REGISTRATION.
COMPLETE,.the.handset.has.been.registered.to.the.base..If.
REGISTRATION.FAILED.appears,.please.try.these.steps.again.
Resetting Handsets
If.you.want.to.register.the.handset.to.a.different.base.or.replace.a.
handset with another one, you must first clear the registration information
from.the.base.and.the.handset..
Press.and.hold.[ ].and.[
#/
].for.at.least.5.seconds,.until.the.SYSTEM.
RESET.menu.appears.
Select.the.DEREGISTER.HS.submenu..WHICH.HANDSET?.appears.in.
the.display.
Use.[
].and.[
].to.select.the.handset.ID.you.want.to.de-register,.and.
then.press.[select/
]..DEREGISTER.HS.appears.
When the phone asks you to confirm, move the cursor to select YES, and then press [select/ ]..You.will.
hear a confirmation tone.
.
2.
3.
.
2.
3.
4.
W h i c h H a n d s e t ?
H a n d s e t # 1
H a n d s e t # 2
W h i c h H a n d s e t ?
H a n d s e t # 1
H a n d s e t # 2