Unitech PA600 - Manual (Page 24)

16
Adjusting the Screen Brightness
Adjust the screen brightness by pressing
the Function button to enable the soft
keys and pressing the 7 (decrease bright-
ness) or 9 (increase brightness) buttons.
Using the Stylus
CAUTION!
Never use anything other than the PA600 stylus on the screen. Other-
wise this could cause a permanent damage.
1. Remove the stylus from its holder.
2. Hold the stylus as you hold a pencil.
3. To make a choice from a menu, lightly tap the tip of the stylus on that choice.
4. To write data into a field on a form, use the stylus to print the letters or numbers.
Use very light pressure.
Function Button
Increase
Brightness
Decrease
Brightness
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.