Unitech PA600 - Manual (Page 47)

Chapter 5 Advanced Settings
39
Adjusting Backlight Setting
The power consumption of the LCD backlight is high, turn off the backlight function if it
is not necessary.
If a backlight is required, set “automatically turn off the backlight” function.
To change backlight settings:
1. Tap Start
→ Settings → Control Panel.
2. Tap Backlight.
The Backlight screen appears.
3. Do any of the following:
– In the Battery Power tab, tap the Dim
LCD Backlight if device is not used
for: check box and select the amount of
time before the backlight dim while run-
ning in battery power mode from the
drop-down list.
– In the External Power tab, tap the Dim
LCD Backlight if device is not used
for: check box and select the amount of
time before the backlight dim while run-
ning in external power mode from the
drop-down list.
– Tap the Turn on the LCD and key...
checkbox to activate the backlight when
the keypad is pressed or the screen is
tapped.
Chapter 5 Advance settings