Unitech PA600 - Manual (Page 32)

24
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Synchronizing with Your Computer
Synchronization takes place according to the options you choose while setting up
ActiveSync on your computer. If you accept the default (On Connect) synchronization
option in the Microsoft ActiveSync Setup Wizard, you’ll be able to simply connect your
PA600 to your desktop computer and synchronization will take place.
If you have not enabled the On Connect feature in Active Sync, you can start Active-
Sync in either of the following ways:
• On your computer, double-click My Computer
→ Mobile Devices folder.
• Connect the USB cable between the computer and PA600.
Connection options
You can set remote synchronization with your computer using the following connec-
tion options:
• USB connection
• Bluetooth connection
• WiFi connection
USB Connection
To synchronize with your computer using a USB connection:
1. Connect your device to your computer using the USB charging cable.
2. Initiate connection by tapping Start
→ Set-
tings
→ Control Panel → PC Connection.
3. Select Enable direct connections to the
desktop computer using this check box.
4. Tap OK.
Bluetooth Connection
Your device is equipped with Bluetooth wireless
technology that you can use to synchronize informa-
tion with a computer equipped with a Bluetooth
adapter or access point. Bluetooth wireless technol-
ogy allows you to communicate with the computer
whenever it is within range.
Follow these instructions to set up a Bluetooth con-
nection.