Unitech PA600 - Manual (Page 27)

Chapter 2 Using the Hardware
19
3. To test the barcode scanner, tap the Test
tab.
4. Tap Tools
5. Tap Enable Scan
6. To perform auto scan, Tap Tools
→ Auto
Scan
→ Start Auto- Scan
7. Choose Interval : 3 secs
8. Tap : Start
9. Laser scans every 3 seconds and barcode
is scanned automatically.
10. Tap Tools
→ Auto-Scan → Stop Auto-
Scan.
11. To enable the scanner outside of the test
tab,
user must enable Scan2Key.exe.
This can be done via the To Kpd tab.
12. Check the box labeled “Start Scan2Key
When Exit and tap OK at the top right. The
scanner will be enabled and scans will be
directed to the keyboard buffer.