Unitech PA600 - Manual (Page 26)

18
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Using the Laser Scanner
The PA600 has an integrated laser scanner which reads all major bar code labels with
excellent performance.
NOTE:
Scanning software must be enabled in order to operate the scanner.
This can be a user-loaded application or a pre-loaded utility such as
Scanner Setting or Scan2Key.
Activate the laser scanner by pressing either
one of the trigger keys located on the left and
right side of the unit.
The PA600 has a built-in Scanner Setting util-
ity that allows you to test the device’s barcode
scan function.
1. To launch Scanner Settings, tap Start
→
Settings
→ Contral Panel → Scanner.
2. The Scanner Control Panel opens.
From here you can configure barcode scanner parameters such as enabling or
disabling barcode symbologies, setting data transmission options, configuring
magnetic and proximity reading options, and setting power management
options.
unitech unitech Scan button