Uniden BT230 - Manual (Page 13)

1
Only one phone at a time can be on an active call.
The headset plays a different ring tone for each phone so you know which one is ringing. To
answer the incoming call, press MFB as usual.
All the button functions remain the same for the first phone (the one you paired first).
To use last number redial on the second phone, press and hold
Down for about 2 seconds.
(When you hear a beep, release the button.)
To activate voice dialing on the second phone, press and hold
Up for about 2 seconds. (When
you hear a beep, release the button.)
TroUBLesHooTinG and MainTenanCe
If you have problems with the headset, see the suggestions in the table below. If these
suggestions don’t help, contact customer support (see the cover for contact information).
If... Try...
The headset won’t turn on. Charging the battery completely. •
The headset won’t pair with
my phone.
Making sure your phone is in pairing mode. Check your phone’s manual for
instructions on Bluetooth device pairing.
Resetting the headset.
Seeing if your phone supports the Bluetooth Headset or Hands Free profiles.
•
•
•
►
►
►
►
►