Uniden BT230 - Manual (Page 16)

If the noise continues, there may be interference
on your phone itself, and any noise in the phone’s
connection will come through on the headset, too.
Transfer the call to your phone and see if the audio
quality improves. If it doesn’t, look around for things
that can interfere with your phone.
Safety and HandlInG
InformatIon
For maximum product life, do not drop, throw, or
crush the headset. Do not expose it to humidity, dust,
or temperatures above 125 F.
cleaNiNg tHe HeadSet
If necessary, remove the earhook. Dampen a lint-
free cloth with water or a cleaner specially designed
for electronics, and gently wipe the headset clean.
Do not expose this product to liquid (water, alcohol,
etc.) or submerse in liquid for any reason.
avoidiNg HeariNg damage
Using any headset or earbud at too high a volume can
cause permanent hearing damage. To reduce the risk
of hearing damage:
•
•
Set the volume at the minimum level needed to
hear in the current environment. If possible, use
your headset in quiet surroundings or try to move to
an area with less background noise before adjusting
the volume.
Start with the volume at its lowest setting, then
gradually increase it until you can hear.
Turn the volume down before powering off the
headset and readjust the volume each time you
turn it on.
If someone next to you can hear the other end of the
call through your headset or if your ears hurt or ring
when you hang up, the volume is too high.
The longer your ears are exposed to noise, the
greater the risk of damage. Limit calls at higher
volumes (or other exposure to loud noise).
For more information on protecting your hearing,
visit the WISE EARS® website ( www.nidcd.nih.
gov/health/wise/ ) or consult an audiologist.
importaNt SaFety iNStructioNS
uniden america corporation doeS Not represent this
product to be waterproof. to reduce the risk of fire,
electrical shock, or damage to the product, do Not
expose this product to rain or moisture.
•
•
•
•
•
•