Uniden BT230 - Manual (Page 15)

15
The headset can be connected only to devices that support the Bluetooth headset or hands-free profile. It is
not compatible with standard cordless phones.
Battery liFe
With average use, the battery should provide about  hours of talk time and  days of standby time. If a
battery is new or left unused for a long time, it can have reduced capacity the first few times you use it. For
maximum battery life, keep the battery charged.
When the battery only has enough charge for about 15 minutes of talk time, the headset triggers a low
battery alert: you’ll hear a periodic beep, and the LED changes from blue to red.
When the battery no longer has enough charge to operate the headset, the headset will power off; you won’t
be able to turn it back on until you charge the battery.
NoiSe or Static oN tHe HeadSet
The most common cause of noise or static on any wireless device is interference. Bluetooth devices operate in
the ISM band (2.02 GHz ~ 2.0 GHz); any equipment operating in this frequency range might interfere with
the headset. Some common sources of interference in this range are
Equipment that uses microwaves, especially microwave ovens
Wireless LAN equipment or WiFi connections
Other Bluetooth devices or computers
Certain cordless telephones
Certain medical equipment and appliances
If you have problems with static during calls, look for one of these interference sources. Try moving away from
the suspected source.
•
•
•
•
•
•
•
•
•