Using your headset, Put your headset on – Uniden BT230 User Manual
Page 9
Advertising
If the headset loses the connection for more than 0 seconds (e.g., if your phone is out of range),
it goes into idle mode. To manually reconnect, press
MFB once. If the headset comes back in
range in less than 0 seconds, it will automatically reconnect without pressing
MFB.
UsinG YoUr HeadseT
Turning the
headset on
To turn the headset on, slide the power button to the ON position. The blue
LED flashes and you hear the turn-on melody (about seconds).
Turning the
headset off
Slide the power button to its original position.
put your headset on
Insert the ear cushion, then wrap
the earhook behind your ear.
Everyone’s ear has a sweet
spot, a particular angle of
the speaker where the audio
►
Advertising