Answering system operation – VTech DS4122-4 User Manual

Page 30

Advertising
background image

www.vtechphones.com

27

Advanced operation

Answering system operation

Answering system setup
Activate the answering system

The answering system must be turned on to answer and record messages.

Press

ANS ON/OFF to turn the answering system on or off. When you

press

ANS ON/OFF to turn the answering system on, it will announce “Calls

will be answered,” and the

ANS ON/OFF light will be on. When you press

ANS ON/OFF to turn the answering system off, it will announce “Calls will

not be answered,” and the

ANS ON/OFF light will be off.

Set the clock

Before playing each message, the answering system announces the day

and time of the message received. Before using the answering system, set

the day, time and year, so that messages are dated correctly. If the clock

is not set before new messages are recorded, the system will announce

“Time and day not set.” before each message is played to remind you to

set the clock.

Press

CLOCK and the system will announce the current clock setting.

The system will then announce

“To set the

CLOCK, press CLOCK.”

Press

CLOCK again and the system will announce the year.

Press

/SKIP or /REPEAT until the system announces the correct year,

then press

CLOCK. The system will announce the hour.

Press

/SKIP or /REPEAT until the system announces the correct hour,

then press

CLOCK. The system will announce the minute.

Press

/SKIP or /REPEAT until the system announces the correct

minute, then press

CLOCK. The system will announce the day.

Press

/SKIP or /REPEAT until the system announces the correct day,

then press

CLOCK. After a confirmation tone, the system will announce

the new clock setting and exit the programming mode.

1.

2.
3.

4.

5.

6.

• Press and hold

/SKIP to increase

or /

REPEAT

to decrease the

minute or year by

increments of 10.

• Incoming caller ID

data will set the

time and date (not

the year). You’ll

need to set the

year so the day of

the week can be

determined from

caller ID data. The

time will only be

set automatically

if you subscribe

to caller ID

service from your

local telephone

company.

Advertising
This manual is related to the following products: