Troubleshooting – VTech DS4122-4 User Manual

Page 43

Advertising
background image

www.vtechphones.com

40

Troubleshooting

Problem

Suggestion

My telephone does

not work at all.

Make sure the battery is installed and charged correctly (pages 3 and 38). For optimum daily

performance, return the cordless handset to the telephone base or charger after use.
Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.
Make sure the telephone line cord is plugged firmly into the telephone base and the telephone

wall jack.
Unplug the electrical power to the telephone base. Wait for approximately 15 seconds,

then plug it back in. Allow up to one minute for the cordless handset and telephone base to

synchronize.
Charge the battery in the cordless handset for at least 16 hours.
Remove and re-insert the battery. If that still does not work, it may be necessary to purchase

a new battery.
Disconnect the telephone base from the telephone wall jack and plug in a working telephone.

If the other telephone does not work, the problem is probably in the wiring or the local service.

Call the local telephone company.



LOW BATTERY is

displayed on screen.

Place the handset in the telephone base or charger for recharging.
Remove and re-install the battery and use it normally until fully discharged, then recharge the

handset on the telephone base or charger for 16 hours.
If the above measures do not correct the problem, the battery may need to be replaced.


If you have difficulty operating your telephone, please try the suggestions below. For Customer Service, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Advertising
This manual is related to the following products: