VTech VT5831 - Manual (Page 11)

11
1
2
1
3
3
The Wall Mount brackets are designed for use on standard wall mount plates only. Wall
mounting is optional.
1. Plug the AC adapters into an electrical outlet, and the DC connector to the bottom
of the Base Unit.
2. Connect the telephone line cord to the jack on the bottom of the Base Unit, and
the other end to the wall jack.
3. Line up the tabs on the wall mount adapters with the holes on the bottom of the
Base Unit/back of the Handset Charger. Snap the wall mount bracket firmly in
place.
4. Mount the Base Unit/Handset Charger on the wall. Position the Base Unit/
Handset Charger so the mounting studs will fit into the holes on the wall mount
bracket. Slide Base Unit/Handset Charger down on the mounting studs until it
locks into place.
Wall Mounting
GETTING ST
AR
TED