VTech VT5831 User Manual
Page 39
39
Your Handset vibrates or shakes when a call comes in
• It is likely that your Vibrating Handset Ringer option has been set to ON. If you’d like
to turn it off, see Handset Settings-VIBRATE CONTROL, on page 22.
You Hear Other Calls While Using Your Phone
• Disconnect your Base Unit from the telephone jack, and plug in a regular telephone.
If you still hear other calls, the problem is probably in your wiring or local service.
Call your local telephone company.
You Hear Noise In The Handset, And None Of The Keys Or Buttons
Work
• Make sure the power cord is plugged in.
In Case Of Difficulty
then
Common Cure For Electronic
Equipment
If the unit does not seem to be
responding normally, then try putting the
Handset in the cradle. If it does not seem
to respond, do the following (in the order
listed) :
1. Disconnect the power to the Base.
2. Disconnect the Handset battery,
and spare battery pack, if
applicable.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery pack (s)
6. Watch for Handset to display :
ADDITIONAL INFORMA
TION