VTech VT5831 - Manual (Page 33)

33
Handset and Base Operation
Intercom
From Base to ALL Handsets :
• To page all Handsets from the Base
press the INTERCOM key. Scroll to
GLOBAL PAGE, then press OK.
• Each Handset will display GLOBAL
CALL FROM BASE.
• Any Handset can then answer the PAGE,
and enter INTERCOM mode with the
Base by pressing the ON or any
number key.
• To end an intercom call, press OFF on
the Handset or INTERCOM on the Base.
From Base to a Specific Handset :
• Press the Base INTERCOM key, then
scroll to the Handset you want to call
(e.g. HANDSET 2).
• Handset 2 can then answer the intercom
call by pressing any key except OFF and
the softkeys.
• To end an intercom call press OFF on
the Handset or INTERCOM on the Base.
From Handset to Base :
• Press MENU, then scroll down to
INTERCOM
• Press OK. Scroll to BASE, then press
OK.
• The Base will ring, then automatically
enter intercom mode.
• To end the intercom call, press OFF on
the Handset or INTERCOM on the Base.
From Handset to Handset :
• Press MENU, then scroll down to
INTERCOM.
AD
V
ANCED OPERA
TION
• Press OK. Scroll to the desired Handset, then press OK.
• The ringing Handset can respond by pressing ON or any of the number keys.
• To end the intercom call, press OFF on either Handset.
Global Page from Handset
• Press MENU, then scroll down to INTERCOM.
• Press OK. Scroll to the GLOBAL PAGE, then press OK.
• Any registered Handset or Base can answer the global page, thus entering
Intercom mode.