VTech VT5831 - Manual (Page 23)

23
Handset Settings
B
ASIC OPERA
TION
• KEYPAD TONE (preset to ON)
Select this option to turn the Keypad tones
on or off. Press the OFF or ON soft key to
make your selection. Press OK to confirm
your selection and return to the HANDSET
SETTINGS menu. When set to ON, the
Handset will emit a beep whenever a key is
pressed.
• CONTRAST
Select this option to adjust the contrast level
of the Handset display. Use the
scroll
keys to make your selection. The Handset
display will automatically adjust as you make
your selection. Press OK to confirm your
selection and return to the HANDSET
SETTINGS menu.
• LANGUAGE (preset to English)
Select this option to change the display from
English to Spanish or French. Use the
scroll keys to select language, then press OK
to confirm your choice.
Register
REMINDER: The Handset that comes with your VT5831 Base is already
registered to it. Use this procedure to add additional Handsets (model VT5820) to
your system.
Use this option to register a Handset to the VT5831 Base. You can register a total of six
Handsets to the Base. This process is activated automatically whenever a new
Handset is powered up in range of the VT5831 Base.
You will be prompted to enter the 15-digit Base ID code. After entering this code, press
OK. The Handset will display SEARCHING FOR BASE, and then FOUND BASE
when the process is complete.
NOTE: Base ID codes are 15 digits long and can include the following characters:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, .
*