VTech VT5831 - Manual (Page 22)

22
B
ASIC OPERA
TION
Handset Settings
From the HANDSET SETTINGS menu you can
select the following options to modify:
• RINGER VOLUME
Select this option to adjust the ringer volume.
Use the
scroll keys to adjust the
volume up or down. You will see a graph on
the Handset display indicating the relative
volume setting. At the lowest setting (graph
is completely clear), the Handset will not ring
when a call comes in.
Press OK to confirm your setting.
• RINGER MELODY
Select this option to adjust the ringer melody
or tone. Use the
scroll keys to select
from the eight available tones. Press OK to
confirm your selection and return to the
HANDSET SETTINGS menu.
• VIBRATE CONTROL (preset to OFF)
Select this option to allow the Handset to
vibrate, alerting you to an incoming call. Press
the ON or OFF soft key to make your
selection, then press OK to confirm.
Vibrate and Ringer are independent features.
Adjusting one does not affect the other.
• LOW BATTERY TONE (preset to ON)
Select this option to turn the Low Battery
warning tone on or off. Press the OFF or ON
soft key to make your selection. Press OK to
confirm your selection and return to the
HANDSET SETTINGS menu. When set to
ON, the Handset will emit a warning tone
when a Low Battery condition is detected.
• RANGE TONE (preset to ON)
Select this option to turn the Out of Range
warning tone on or off. Press the OFF or ON
soft key to make your selection. Press OK to
confirm your selection and return to the
HANDSET SETTINGS menu. When set to
ON, the Handset will emit a warning tone
whenever the Handset is taken out of range
of the Base.