Owner’s manual, Product features, Remote control accessories – Vanguard Heating VMH26PRA User Manual

Page 3: Local codes, Unpacking, Product identification, Safety information, Continued

Advertising
background image

3

107034

OWNER’S MANUAL

For more information, visit www.desatech.com

PRODUCT
FEATURES

SAFETY PILOT

This fireplace has a pilot with an Oxygen
Depletion Sensing (ODS) safety shutoff
system. The ODS/pilot is a required feature
for vent-free room fireplaces. The ODS/
pilot shuts off the fireplace if there is not
enough fresh air.

PIEZO IGNITION SYSTEM

This fireplace has a piezo ignitor. This sys-
tem requires no matches, batteries, or other
sources to light fireplace..

REMOTE CONTROL
ACCESSORIES

There are four optional remote controls that
can be purchased separately for this log
heater:

• hand-held ON/OFF remote

• hand-held thermostat remote

• wall mounted thermostat

• wall mounted ON/OFF switch

See Accessories, pages 28 and 29.

LOCAL CODES

Install and use fireplace with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code ANS Z223.1
, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

16. Operating fireplace above elevations of

4,500 feet could cause pilot outage.

17. Do not operate fireplace if any log is

broken. Do not operate fireplace if a
log is chipped (dime-sized or larger).

18. To prevent performance problems, do

not use propane/LP fuel tank of less
than 100 lbs. capacity.

UNPACKING

1.

Remove log box and fireplace from
carton.

IMPORTANT:

The fireplace

hood is inside the cardboard protective
end wrap on the left side of fireplace
(as viewed from front). A decal is on
the outside of the cardboard end wrap
stating hood is enclosed (see Figure 2).

2.

Remove hood from cardboard protec-
tive end wrap as shown in Figure 2.

3.

Remove all protective packaging ap-
plied to fireplace for shipment.

4.

Make sure your fireplace includes one
hardware packet.

5.

Check fireplace for any shipping
damage. If fireplace is damaged,
promptly inform dealer where you
bought fireplace.

Figure 2 - Removing Fireplace Hood

IMPORTANT:

THIS PACKAGE CONTAINS A

FIREPLACE HOOD. UNWRAP

CARTON AND REMOVE HOOD

BEFORE DISCARDING

PROTECTIVE PACKAGING.

1

2

Hood

Cardboard
Protective
Fireplace
End Wrap

Hood Enclosed
Decal

PRODUCT IDENTIFICATION

Figure 1 - Vent-Free Natural Gas Compact Fireplace

AUT

O

ON

OFF

COOLER

W

ARM

ER

TEM

P

ON

OFF

REM

OTE

Screen

Fireplace
Cabinet

Log Set

Ignitor Button

Selector Switch
(Optional)

Control
Knob

Remote Control
(Optional)

SAFETY
INFORMATION

Continued

Advertising