Vivotek IP3111/3121 - Manual (Page 13)

12
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
How to Install
To easily fit into various environments, Network Camera automatically detects the attached interfaces and
configures itself to the best condition. Therefore users need not care how to select the network between
Ethernet and modem, and whether the Ethernet speed is 10Mbps or 100 Mbps. The high performance
built-in CCD and lens always give users delicate image quality.
Network Camera supports Ethernet and modem interfaces according to the user's existing network.
Ethernet can provide higher bandwidth to achieve the best performance while dial-up network with
modem is more common in current Internet applications. Refer to the related installation section for your
network environment. If both interfaces are available, Ethernet is recommended and will be chosen as the
first priority if Ethernet cable and modem are concurrently attached. Managing to install in the other
interface will automatically clear the previous network settings to start new installation.
In the following content, "user" refers to those who can access Network Camera and "administrator"
means the supervisor who has the root password to configure Network Camera in addition to general
access. Administrators should carefully read this manual, especially during installation.