Vivotek IP3111/3121 - Manual (Page 20)

19
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
FTP Port” and “Root Password” because they are already changed to other than default settings. If the
settings are lost, restore default settings and use installer to install again.
Once installation is complete, administrators should follow the actions in the "First access to
VisualServer" section for necessary checks and configurations. Experienced administrators may use the
customized config.ini script file to perform a quick setup via FTP. Detailed procedure can be found on the
section “One-shot fast configuration via FTP”.
To allow users to connect to Network Camera through an easily memorized name, the administrators must
first configure the name server in his network. Here is an example: When the administrator wants to set
up Network Camera with a fixed IP address and let users connect to Network Camera by typing a name
instead of IP address, the administrator may reserve the IP from DHCP service and assign it with name in
the domain name service. During Network Camera installation, assign the ready IP address. After
successful installation, users may access the Network Camera by the given name.