Vivotek PZ7131 - Manual (Page 33)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 33
Network
This section explains how to configure wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is intended
to be accessed by local computers� The default setting of Network Type is LAN� Remember to click Save
when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a
DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�
1� You can make use of VIVOTEK installation wizard II on the software CD to easily set up the Network
Camera in LAN� Please refer to Software installation on page 12 for details�
2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�
Enable UPnP presentation: Select this option to enable UPnP TM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,
UPnP TM is supported by Windows XP or later. Note that to utilize this feature, please make sure the