Vivotek PZ7131 - Manual (Page 68)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
68 - User's Manual
An event is an action initiated by user-defined trigger source; it is the causal arrangement of the following
three elements: Trigger, Event Schedule, and Action�
Trigger
Also referred as the cause or stimulus, defines when to trigger the Network Camera. The trigger source
can be configured to use the Network Camera’s built-in motion detection mechanism or external digital
input devices�
There are several choices of trigger sources as below� Select the item to display the detailed
configurations.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source� To enable this
function, you need to configure Motion Detection window first. For more information, please refer to
Motion detection on page 58 for details�
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. At most
999 minutes can be set�
■ Digital input
This option allows the Network Camera to use external digital input device or sensor as a trigger
source� Depending on your applications, there are many choices of digital input devices on the market
which helps to sense any changes in temperature, vibration, sound and light, etc�
■ System boot
This option allows the Network Camera to trigger when the power of Network Camera is disconnected�
■ Recording notify
This option allows the Network Camera to trigger when the recording storage file is full or begin
cycle reording� If you want receive Recording notify message, please refer to page 77 for detailed
information�