Vivotek PZ7131 - Manual (Page 95)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 95
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 enable automatic daylight saving to time
zone
daylight_dstactual
mode
<boolean> 6/7 check if current time is under daylight
saving time.
daylight_auto_beg
intime
string[19] 6/7 display the current daylight saving begin
time.
(product dependent)
daylight_auto_end
time
string[19] 6/7 display the current daylight saving end
time.
(product dependent)
updateinterval 0,
3600,
86400,
604800,
2592000
6/6 0 to Disable automatic time adjustment,
otherwise, it means the seconds between
NTP automatic update interval.
restore 0,
<positive integer>
7/6 Restore the system parameters to default
value after <value> seconds.
reset 0,
<positive integer>
7/6 Restart the server after <value> seconds if
<value> is non-negative.
restoreexceptnet <Any value> 7/6 Restore the system parameters to default
value except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to default value
except a union of combined results.
restoreexceptdst <Any value> 7/6 Restore the system parameters to default
value except all daylight saving time