VistaQuest VQ-3110 - Manual (Page 13)

- 9 -
4. Press ▲ or ▼ to adjust the date and time. Press ◄ or ► to advance to
the next setting.
5. When finished, press the MENU button to exit the menu.
Use the Date Stamp setting to imprint the date on your pictures.
1. In the Date Time Setting menu. Make sure
the camera clock is set to the correct date.
2. Press ◄ or ► to select [Date stamp]
option.
3. Press the Enter button to switch the Date
stamp function to on (tick on) or off (tick off).
4. Press the MENU button to exit the menu.
• Power Saving:
The VQ-3110 digital camera will automatically power off approximately 3
minutes after you do not perform any operation.
When this function is disabled, the power is not turned off automatically.