VistaQuest VQ-3110 - Manual (Page 14)

- 10 -
7. Taking Pictures
• Taking a Picture
1. Turn on the camera.
2. The LCD monitor will display image
and symbols.
3. Slide the Function switch to
(Capture Function).
4. The LCD monitor will display (Snapshot Mode). If icon is different,
press the MODE button (▼) until the icon appears on the LCD monitor.
5. Point the camera at the subject, use the monitor screen or the viewfinder to
compose the image. (If turn the Macro switch to , you can take picture as
close as 50cm.)
6.Holding the camera still, gently press the Shutter button to take the picture.
7.The will show on monitor while the camera is recording.
Note:
How to take a good shot? After pressing down shutter button, keep your
hand steady for 2 seconds to get best result.