VistaQuest VQ-3110 - Manual (Page 21)

- 17 -
• Using Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on
the camera LCD, on a television screen, or on any external display device
equipped with a video input.
1.Make sure the Function switch is set to ►, and then press the MENU
button.
2.Press the ▲ or ▼ to select [View] on the screen and press the Enter button.
3.Press the ▲ or ▼ to select
and press the Enter button.
4.Each picture and video thumbnails is displayed once, in the order in which
you took them.
5.After slide show finished, It’s auto out of Slide Show function and then show
last picture in playback mode.
Note:
If you want to run the slide show on a television, connect the video cable
from the video-out port on the camera to the video-in port on the
television. Ensure that the Video Out setting is correctly set to NTSC or
PAL.
• Magnifying Pictures
Use the Magnify feature to zoom in to different areas of the picture.
1.Make sure the Function switch is set to ►.
2.Use ◄ ►or▲ ▼ to select the picture you want to enlarge, and then press
the MENU button.
3.Press the ▲ or ▼ to select [Zoom] on the screen and press the Enter
button.