VistaQuest VQ-3110 - Manual (Page 17)

- 13 -
• Setting Picture Quality
Use the Quality setting to select a picture resolution:
1. Make sure the Function switch is set to
, and then press the MENU
button.
2. Press the ▲ or ▼ to select [
Size]
and press the Enter button.
3. Select an option with ▲ or ▼:
L (2400 x 1800) — for enlarged picture size; produces higher picture
resolution and larger file size.
M (2048 x 1536)
— for standard picture size; produces normal picture
resolution and middle file size.
S (1600 x 1200)
— for small picture size; pictures are of lower resolution
and file size is smaller.
4. Press the Enter button to confirm.
Note:
1. This setting remains until you change it.
2. Movies can be shot with the QVGA (320 x 240) or VGA (640 x 480)
resolution.
• Adjusting the Exposure
Set the exposure value (EV value) manually to compensate for certain lighting
Conditions including: backlighting, indirect lighting, and dark backgrounds.
1. Make sure the Function switch is set to
, then press the MENU button.
2. Press the ▲ or ▼ to select [
EV]
and press the Enter button.
3. Press the ▲ or ▼ button to change the exposure value:-2.0 EV ~+2.0 EV.
4. Press the Enter button to confirm.