VBrick Systems 7000 - Manual (Page 19)

System Configuration
VBrick H.264 Appliance Admin Guide 13
Usernames & Passwords
Use this page to define user names and passwords and their corresponding permissions with
respect to the appliance. (Table 2 shows the default user names, passwords, and permissions.)
It also lets you assign a Pin number that will allow direct access to the keypad and functions
on the appliance front panel (if the appliance is configured with a front panel.
Read or Write Script
Files You can add scripts to the /scripts folder on the appliance via FTP
by clicking on the
FTP Scripts
button.
User Function Script
1–4 Use this parameter to associate a user-defined and user-named .txt
script file with (F1–F4) function keys on the front panel. Simply
press the appropriate function key to execute the script. For an
example of a user-defined script, see Sample Script on page 17.
User Name Enter desired user name. Cannot exceed 20 characters. It may include
any combination of alphanumeric characters and only the following
special characters:
~ ! # $ ^ * + & [ ] { } | < > See Table 2 below for
defaults.
Password Enter password. Cannot exceed 20 characters. May include any
combination of alphanumeric characters but only the following special
characters:
~ ! # $ ^ * + & [ ] { } | < > See Table 2 for defaults.
Confirm Confirm new password entry. The appliance will then display a user
message and reboot.
Pin Default = 0000 . Enter a four-digit numeric string that will allow direct
access to the keypad and functions on the appliance front panel.
Confirm Pin Enter the same numeric string from above to confirm.