VBrick Systems 7000 - Manual (Page 55)

Program Configuration
VBrick H.264 Appliance Admin Guide 49
Click Here to Play Stream Edit Mode/Read-only. Shown in Edit mode only if the server
is enabled. Click once to launch the stream in the QuickTime
plugin (using the SDP file). This link will work only with
QuickTime 7.0 or higher. If QuickTime is not installed, you will
be prompted to download the application from Apple.
Choose Server to Configure Select from dropdown list. The number of servers is
configured on the Program Configuration > Programs page.
Enable Server Check to enable the server. Default = enabled. The server
must be enabled for streaming to occur
Server Name User-defined name for this server.
Select Video Rate Select video rate (defined on Audio/Video Configuration >
Video page) from dropdown list.
Select Audio Rate Select audio rate (defined on Audio/Video Configuration >
Audio page) from dropdown list.
Estimated Bit Rate Read-only. This is an estimate. The actual bit rate will vary
based on the content.
Resource Name Defines the server URL. Default = vbStreamXSY where X is
the program number and Y is the server number.
Stream URL Read-only. Use this URL in QuickTime or VLC to view the
stream via RTSP.
RTCP Transmit Enable allows RTCP sender reports to be sent from the
VBrick appliance. Default = Enable.