VTech ia5876 - Manual (Page 10)

www.vtechphones.com 9 GETTING STARTED
G
ett
in
g S
ta
rte
d
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call . If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press or until DATE/TIME is displayed . Press SELECT.
• The month is flashing. Press or until the screen displays the correct month . Press SELECT .
• The day is flashing. Press or until the screen displays the correct day . Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour . Press SELECT.
• The minute is flashing. Press or until the screen displays the correct minute . Press SELECT.
• AM or PM is flashing. Press or to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life .
 . With the handset in idle (off) mode, press PROG .
2 . Press or until the screen displays RINGER: and current setting .
3 . Press SELECT . The current setting blinks, and you will hear a sample of the ring .
4 . Press or to select RINGER: 1, 2, 3, 4 or OFF . You will hear a sample of each ring tone .
5 . Press SELECT to choose the displayed ringer setting .
• In the event of a
power outage, or if
your phone’s power
cord is unplugged,
the time setting will
be lost .