Alarm report when requested, Nuisance prevention (npc) – Viper 5901 User Manual

Page 36

Advertising
background image

Feature Details

33

© 2009 Directed Electronics. All rights reserved.

Table of Zones

Zone # (led flashes) Zone

Name

1

Trunk

2

Shock Sensor

3

Door

4

Sensor 2

5

Ignition

6

Hood

Alarm Report when requested

The Alarm Report displays the two most recent alarm triggers depend-
ing on the system state when requested. When disarmed, the report
will display text to identify the two most recent triggers since the ve-
hicle was last driven. When armed, the report will display text to
identify the two most recent triggers since the system was armed.

Note

The Alarm Report clears when ignition is turned on.

Nuisance Prevention (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,
bypasses them until corrected. If a point of entry (trunk, hood, door)
is left open following a forced entry, it is bypassed. It becomes active
again only after being closed.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset
bypassed sensors.

Advertising