VTech 20-2432 - Manual (Page 31)

30
Advanced OperationsAdvanced OperationsAdvanced OperationsAdvanced OperationsAdvanced Operations
Flash Function Flash Function Flash Function Flash Function Flash Function
During an active call pressing either the
MUTE MUTE MUTE MUTE MUTE soft key on the Handset or the
MUTE MUTE MUTE MUTE MUTE key on the Base (when in
Speakerphone or Headset mode), will
disable the microphone. Press MUTE MUTE MUTE MUTE MUTE
again to return to the 2-way
conversation.
Hold Function Hold Function Hold Function Hold Function Hold Function
From the Handset : From the Handset : From the Handset : From the Handset : From the Handset :
• Press the HOLD HOLD HOLD HOLD HOLD soft key to place a
call on hold. To return to the call
press the appropriate LINE. LINE. LINE. LINE. LINE.
From the Base : From the Base : From the Base : From the Base : From the Base :
•
During an active call, press the
HOLD HOLD HOLD HOLD HOLD key to place a call on hold.
The LINE LINE LINE LINE LINE key will flash to indicate
a call is on hold.
• To return to the call press the
appropriate LINE LINE LINE LINE LINE and then press
SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE.(or HEADSET HEADSET HEADSET HEADSET HEADSET)
You can use your 20-2432 20-2432 20-2432 20-2432 20-2432 with
services such as call waiting. Simply
press the LINE
LINE LINE LINE LINE key on the Handset
or the FLASH FLASH FLASH FLASH FLASH key on the Base (when
in Speakerphone or Headset mode) to
flash the line.
Mute Function Mute Function Mute Function Mute Function Mute Function
If the Base is active on one line when the idle line rings, you will hear a special
alert tone, signifying an inbound call. This alert is designed to minimize
disruption of the call in progress. You can then:
• Press SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE (or HEADSET HEADSET HEADSET HEADSET HEADSET if you are using a Headset
connected to the Base) to end the first call, then Press SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE
or HEADSET HEADSET HEADSET HEADSET HEADSET to answer the new call;
-OR- -OR- -OR- -OR- -OR-
• Press the HOLD HOLD HOLD HOLD HOLD soft key to place the original call on hold. After that,
press the appropriate LINE LINE LINE LINE LINE key and then SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE (or
HEADSET HEADSET HEADSET HEADSET HEADSET) to answer the new call. You can end the “new” call by pressing
SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE (or HEADSET HEADSET HEADSET HEADSET HEADSET). Return to the original call by pressing
the appropriate LINE LINE LINE LINE LINE key and then SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE SPEAKERPHONE (or HEADSET HEADSET HEADSET HEADSET HEADSET).
You can also Conference both lines together . See Conference Calling Conference Calling Conference Calling Conference Calling Conference Calling, further
on in this User’s Manual.
Handset and Base Operation Handset and Base Operation Handset and Base Operation Handset and Base Operation Handset and Base Operation