VTech 20-2432 - Manual (Page 46)

45
FCC Part 68 and ACTA FCC Part 68 and ACTA FCC Part 68 and ACTA FCC Part 68 and ACTA FCC Part 68 and ACTA
If this equipment was approved for connection to the telephone network prior
to July 23, 2001, it complies with Part 68 of the Federal Communications Com-
mission (FCC) rules. If the equipment was approved after that date, it com-
plies with the Part 68 rules and with Technical Requirements for Connec-
tion of Equipment to the Telephone Network adopted by the Administra-
tive Council for Terminal Attachments (ACTA). We are required to provide
you with the following information.
1. Product identifier and REN information 1. Product identifier and REN information 1. Product identifier and REN information 1. Product identifier and REN information 1. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other
things, an identifier indicating product approval and the Ringer Equiva-
lence Number (REN). This information must be provided to your local
telephone company upon request. For equipment approved prior to July
23, 2001, the product identifier is preceded by the phrase “FCC Reg No.”
and the REN is listed separately. For equipment approved after that date,
the product identifier is preceded by “US” and a colon (:), and the REN
is encoded in the product identifier without a decimal point as the
sixth and seventh characters following the colon. For example, the
product identifier US:AAAEQ03T123XYZ would indicate an REN of 0.3.
The REN is used to determine how many devices you may connect to
your telephone line and still have them ring when you are called. In
most, but not all areas, the sum of all RENs should be five (5.0) or less.
You may want to contact your local telephone company for more infor-
mation.
2. Connection and use with the nationwide telephone network 2. Connection and use with the nationwide telephone network 2. Connection and use with the nationwide telephone network 2. Connection and use with the nationwide telephone network 2. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipment to the premises wiring
and the telephone network must comply with the applicable Part 68 rules
and technical requirements adopted by ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. An
RJ11 jack should normally be used for connecting to a single line
and an RJ14 jack for two lines. See Installation Instructions in the
user’s manual. This equipment may not be used with Coin Tele-
phone Lines or with Party Lines. If you have specially wired alarm
dialing equipment connected to your telephone line, ensure the con-
nection of this equipment does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, con-
sult your telephone company or a qualified installer.
3. Repair instructions 3. Repair instructions 3. Repair instructions 3. Repair instructions 3. Repair instructions
If this equipment is malfunctioning, it must be unplugged from the
modular jack until the problem has been corrected. Repairs to this tele-
phone equipment can only be made by the manufacturer or its
authorized agents. For repair procedures, follow the instructions
outlined under the Limited Warranty.
4. Rights of the telephone company 4. Rights of the telephone company 4. Rights of the telephone company 4. Rights of the telephone company 4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the tele-
phone company may temporarily discontinue your telephone service.
The telephone company is required to notify you before interrupting
service. If advancenotice is
not practical, you will be notified as soon as possible. You will be given
the opportunity to correct the problem and the telephone company is
required to inform you of your right to file a complaint with the FCC.
FCC, ACTA and IC Regulations FCC, ACTA and IC Regulations FCC, ACTA and IC Regulations FCC, ACTA and IC Regulations FCC, ACTA and IC Regulations
Additional InformationAdditional InformationAdditional InformationAdditional InformationAdditional Information