Asus S1-AT5NM10E - Manual (Page 37)

3-5 ASUS S1-AT5NM10E
Install the Windows ® XP Service Pack 2 or later version before using Serial ATA.
3.4 Connectors
1. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
and optical disk drives.
2. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
AT5I0N3L
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
AT5I0N3L SATA connectors
AT5I0N3L fan connectors
CHA_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
CPU_FAN
AT5I0N3L