Asus S1-AT5NM10E - Manual (Page 49)

ASUS S1-AT5NM10E 4-11
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.4 Storage Configuration
The items in this menu allow you to set or change the configurations for the SATA
devices installed in the system. Select an item then press <Enter> if you want to
configure the item.
Configure SATA as [IDE]
Sets the configuration for the Serial ATA connectors. Configuration options: [IDE]
[AHCI] [Disabled]
SATA Run Mode Configuration [Compatible]
Sets the SATA run mode configuration. Configuration options: [Compatible]
[Enhanced]
Select the type
of device con-
nected
S1-AT5NM10E BIOS Setup Version 0103
Main
Storage Configuration
Configure SATA as [IDE]
SATA Run Mode Configuration [Compatible]
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
IDE
AHCI
Disabled
Options