Asus S1-AT5NM10E - Manual (Page 42)

4-4 Chapter 4: BIOS setup
4.1.2 ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.36
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
• Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and
press <Enter> to enable it.
2. Press <Tab> to switch between drives until the correct BIOS file is found,
then press <Enter>. EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single
partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
Current ROM Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: S1-AT5NM10E
VER: 0103 (H:00 B:02)
DATE: 04/06/2010
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit