Asus S1-AT5NM10E - Manual (Page 61)

ASUS S1-AT5NM10E 4-23
4.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
4.6.1 Boot Device Priority
1st ~ xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system. Configuration options: [Hard Drive]
[ATAPI CD-ROM] [Removable Dev.] [Disabled]
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Device Priority
1st Boot Device [USB: JetFlash Trans]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Specifies the boot
sequence from the
available devices.
S1-AT5NM10E BIOS Setup Version 0103
Boot
• To select the boot device during system startup, press <F8> when ASUS
logo appears.
• To access Windows OS in Safe Mode, do any of the following:
• Press <F5> when ASUS logo appears.
• Press <F8> after POST.
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot settings
Boot Device Priority
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
S1-AT5NM10E BIOS Setup Version 0103
Main Advanced Power Boot Tools Exit
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.