Asus S1-AT5NM10E - Manual (Page 46)

4-8 Chapter 4: BIOS setup
4.2.4 Menu items
The highlighted item on the menu bar
displays the specific items for that
menu. For example, selecting Main
shows the Main menu items.
The other items (Advanced, Power,
Boot, Tool, and Exit) on the menu bar
have their respective menu items.
4.2.5 Sub-menu items
A solid triangle before each item on any menu screen means that the iteam has a
sub-menu. To display the sub-menu, select the item and press <Enter>.
4.2.6 Configuration fields
These fields show the values for the menu items. If an item is user- configurable,
you can change the value of the field opposite the item. You cannot select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press <Enter> to display a list of options.
Refer to 4.2.7 Pop-up window.
4.2.7 Pop-up window
Select a menu item then press
<Enter> to display a pop-up window
with the configuration options for that
item.
4.2.8 Scroll bar
A scroll bar appears on the right side
of a menu screen when there are
items that do not fit on the screen.
Press the
Up/Down arrow keys or <Page Up> /<Page Down> keys to display the other items
on the screen.
4.2.9 General help
At the top right corner of the menu screen is a brief description of the selected
item.
Main menu items
System Time [14:32:36]
System Date [Fri 06/25/2010]
SATA 1 :[Not Detected]
SATA 2 :[Not Detected]
Storage Configuration
System Information
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.
S1-AT5NM10E BIOS Setup Version 0103
Main Advanced Power Boot Tools Exit
Pop-up window
S1-AT5NM10E BIOS Setup Version 0103
Main Advanced Power Boot Tools Exit
SATA 1
Device : Not Detected
Type [Auto]
LBA/Large Mode [Auto]
Block(Multi-Sector Transfer) M [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Enabled]
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Select the type of
device connected to
the system.
Options
Auto
CDROM
ARMD
Not Installed