Vizio VO37L 20A - Manual (Page 10)

VIZIO VO37L FHDTV20A User Manual
10
www.VIZIO.com
Setting Up Your HDTV
! Read this user manual carefully before installing your HDTV.
! The power consumption of your HDTV is about 103W (AVG). Use the included power cord. When
an extension cord is required, use one with the correct power rating. The cord must be grounded
and the grounding feature must not be compromised.
! Your HDTV should be installed on a flat surface to avoid tipping.
! For proper ventilation, you must allow space between the back of your HDTV and the wall.
! If you want to mount your HDTV on the wall, see below for additional information.
! Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
! Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for
viewing. If you choose to mount your HDTV on
the wall, follow the instructions below.
Remove the stand base and neck:
a. Disconnect the cables from your
HDTV.
b. Place your HDTV face down on a
soft, flat surface to prevent
damage to the screen.
c. Push up the plastic panel on the
back of the stand and lift it away
once to release.
d. Remove the eight (8) screws
holding the stand neck, and then
remove the neck and base.
The pitch of the mounting holes is 400mm
horizontally and 200mm vertically.
The screw type required is metric M6, 1.00mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set,
our brackets come with different length
screws.