Vizio VO37L 20A - Manual (Page 24)

VIZIO VO37L FHDTV20A User Manual
24
www.VIZIO.com
STEREO SYSTEM
Connecting an External Receiver/Amp
1. Turn off the power to the HDTV and
Receiver/Amp.
2. Using an audio cable (white and red connectors),
connect the cable to the audio input connectors
on the Receiver/Amp and connect the other end
to the AUDIO OUT audio connectors at the rear
of the HDTV.
3. Turn on the power to the HDTV and
Receiver/Amp.
4. Then press the MENU button on the remote
control to open the On-Screen Display (OSD) menu.
5. Press ! on the remote control to highlight the Audio menu.
6. Press " on the remote control to select SPEAKERS.
7. Press ! on the remote control to select OFF so the sound from the HDTV will be routed
through your Receiver/Amp system.
Note:
! Refer to your Receiver/Amp user manual to select the corresponding audio input.
! The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the OPTICAL
digital audio out at the rear of the HDTV. This is active when receiving audio with the programs being
viewed no matter what input is being used.