Vizio VO37L 20A - Manual (Page 29)

VIZIO VO37L FHDTV20A User Manual
Version 3/30/2009 29
www.VIZIO.com
Select Input Source
Select the Input Source for the HDTV by pressing the INPUT
button on the remote control. Pressing this button will cycle you
through the following options: TV, AV1/S-VIDEO, AV2,
Component1, Component2, RGB, HDMI1, HDMI2, and HDMI3.
Turn on your Cable Box, VCR, External TV Tuner or Satellite
Receiver and you will see a picture on your HDTV. If there is no
picture, make sure you have selected the correct input on the
HDTV.
If the selected input is RF, you should be aware that the HDTV
needs to be on either channel 3 or channel 4 matching the
channel which has been selected on the back of the VCR, Cable
Box, External TV Tuner or Satellite Receiver; please refer to
Owner or User’s Manual of such equipment for details.
Note: Your HDTV will display the television station or program selected by the cable box, VCR, external
tuner, or satellite receiver. Use the remote control that came with that component to change programs or
channels. If the service being used is the one which setup includes a box with two outputs for two
different (distant) rooms, then scanning channels will help you to find the signal. Be aware that the
channel to be selected varies from provider to provider. You may have to call your provider to get the
specific channel when using your HDTV. Some examples of these channels are 105, 106, 115, and 116.