Tv menu – Vizio VO37L 20A User Manual
Page 39
VIZIO VO37L FHDTV20A User Manual
Version 3/30/2009
39
www.VIZIO.com
TV Menu
When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV
menu.
1. Press the
button on the remote control and the Picture menu will be shown on the screen.
2. Press ! on the remote control to display the TV menu.
3. Press
#
or
"
on the remote control to select a TV menu option.
4. Once the menu option is highlighted, press $ or ! on the remote control to adjust the setting.
5. Press the LAST key once to return to the previous screen or repeatedly to return to your program if
the task has been completed.
Tuner Mode
Select Cable or Air (Antenna) depending upon
which equipment you have attached to the DTV /
TV Input.
Auto Search
Automatically search for TV channels that are
available in your area. The TV will search for
analog and digital channels.
Partial Channel Search
If you believe channels are missed from the auto
search, you can do a partial channel search to
look for channel in a certain channel range again.
Press the
"
button to highlight the Partial Channel
Search selection.
Press the ! button to enter the submenu.
Press the ! button to select scan mode to look for
Analog, Digital, or both Analog/Digital channels.
Press the
"
button to highlight the “To” and
“From” selection. Press the ! button to select the
range of channel numbers you want to start
searching in.
Press
to start channel search..
Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press
and ! buttons to open the TV TUNER SETUP menu and then press the
"
button to highlight SKIP CHANNEL. Press the ! button to select this channel to be skipped when
using the
#
or
"
buttons. You will still be able to select this channel using the number buttons on the
remote control.
MTS
This feature allows you to select the different languages the broadcaster is transmitting the audio with the
program you are watching. This signal is usually Spanish.