Vizio VO37L 20A - Manual (Page 37)

VIZIO VO37L FHDTV20A User Manual
Version 3/30/2009 37
www.VIZIO.com
Audio Menu
1. Press the button on the remote control and
the Picture menu will be shown on the screen.
2. Press ! on the remote control to display the
Audio Adjust menu.
3. Press # or " on the remote control to select
an Audio menu option.
4. Once the menu option is highlighted, press $ or
! on the remote control to adjust the setting.
5. Press the LAST key once to return to the
previous screen or repeatedly to return to your
program if the task has been completed.
Audio Mode
Choose from Flat, Rock, Pop, Classic or Jazz.
Equalizer
To select the options in the Equalizer sub-menu,
press the ! button. A new menu will be displayed
showing the volumes of different frequencies
(pitches).
Starting from lowest to the highest pitch, they are
120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz.
1. Press " or ! to select the frequency to be
adjusted.
2. Use $ or ! to adjust the selected
frequency to your preference. Values above
0 will boost the frequency and values below
0 will attenuate the frequency.
Balance
Adjust the sound to the left or the right.
SRS TSXT
This option sets the SRS TruSurround XT surround sound process. Choose from On or Off.
Note: When SRS TSHD is ON, Equalizer adjustments are not available.
Digital Audio Out
This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a
Receiver/Amplifier/Home Theater system. Select to choose from OFF, Dolby Digital or PCM.
Speakers
Turn the internal speakers On or Off. You may want to turn the internal speakers off when listening to the
audio through your Home Theater System.