Operating guidelines and maintenance instructions, Replacement parts – Vanguard FBST User Manual

Page 15

Advertising
background image

www.desatech.com

105116-01D

15

OPERaTiNg gUiDELiNES

aND MaiNTENaNCE

iNSTRUCTiONS

When lit for the first time, a vent-free log heater will

emit a slight odor for about an hour or two. This is

a normal occurrence which is due to the “curing”

of the logs and the “burn-in” of internal paints and

lubricants used in the manufacturing process.

Keep control compartments, logs, burners and

areas surrounding the logs clean by vacuuming or

brushing at least twice a year. Temporary removal

of the log set may ease the cleaning of the burner

and pilot assembly. In cleaning, take care not to

alter the settings on the pilot assembly. See the

operating instructions supplied with your vent-free

log heater for additional cleaning instructions.

WARNING: Logs can be very

hot! Allow logs to cool before

handling.

IMPORTANT:

Turn off the gas supply at the exter-

nal shutoff valve before servicing appliance. Any

safety screen or guard removed for servicing must

be replaced prior to operating the appliance.

Installation and repair should be done by a quali-

fied person. The appliance should be inspected

before use and at least annually by a professional

service person. More frequent cleaning may be

required due to excessive lint from carpeting, pet

hair, etc. It is imperative that the control compart-

ments, burners and circulating air passageways of

the appliance be kept clean.

WARNING: Children and

adults should be alerted to the

hazards of high surface tempera-

tures and to stay away to avoid

burns or clothing ignition. Young

children should be carefully

supervised when they are in the

same room as the appliance.

For lighting and operating this vent-free firebox,

please refer to the vent-free gas logs manufactur-

er’s instruction manual.

REPLaCEMENT PaRTS

Note:

Use only original replacement parts. This

will protect your warranty coverage for parts

replaced under warranty.

pARTS UNDER WARRANTY

Contact authorized dealers of this product. If they

can’t supply original replacement part(s), call

DESA at 1-866-672-6040.

When calling DESA, have ready

• your name

• your address

• model and serial numbers of your firebox

• how firebox was malfunctioning

• type of gas used (propane/LP or natural gas)

• purchase date

Usually, we will ask you to return the defective

part to the factory.

pARTS NOT UNDER WARRANTY

Contact authorized dealers of this product. If

they can’t supply original replacement part(s),

call DESA at 1-866-672-6040 for referral infor-

mation.

When calling DESA, have ready

• model number of your firebox

• the replacement part number
Note:

The firebox identification label (including

model number, serial number, clearances, etc.) is

located above the brick liner and under the heat

shield. See Figure 20.

Figure 20 - Location of Firebox

Identification Label

Air Deflector

Identification Label

Brick Liner

Heat Shield

Advertising