Handset face layout, Battery installation, Getting started – VTech DECT CS6419-2 User Manual

Page 7

Advertising
background image

3

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector securely into the socket inside the handset

battery compartment.
Place the battery with the label

THIS SIDE UP facing up and the wires inside

the battery compartment.
Align the cover flat against the battery compartment, then slide it towards the

center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The

CHARGE light is on when the handset is charging.

1.

2.

3.

4.

If the handset will not be used for a long time, disconnect and remove the

battery to prevent possible leakage.
To purchase replacement batteries, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial 1 (800) 267-7377.

1

CHARGE light

remains on when

charging.

2

3

4

Advertising
This manual is related to the following products: