VTech DECT CS6419-2 - Manual (Page 18)

14
Home area code
If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code in
the call log.
Press MENU/
SELECT
when the handset is not in use.
Press or to select >SETTINGS, then press
MENU
/SELECT.
Press or to select >HOME AREA CODE, then press
MENU
/SELECT.
Use the dialing keys to enter the desired home area code.
Press
MUTE
/DELETE to delete a digit.
Press and hold
MUTE
/DELETE to delete the entire entry.
Press
MENU
/SELECT to save the selection. You hear a confirmation tone.
Dial mode
The default dial mode is tone dialing. If you have pulse (rotary) service, you need
to change the dial mode to pulse dialing before using the telephone.
Press MENU/
SELECT
when the handset is not in use.
Press or to select >SETTINGS, then press
MENU
/SELECT.
Press or to select >DIAL MODE, then press
MENU
/SELECT.
Press or to choose TONE or PULSE.
Press
MENU
/SELECT to save your selection. You hear a
confirmation tone.
1.
2.
3.
4.
•
•
5.
1.
2.
3.
4.
5.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed, following the steps above. After
you have deleted the home area code, _ _ _ will appear in the display.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed, following the steps above. After
you have deleted the home area code, _ _ _ will appear in the display.
Telephone settings
>HOME AREA CODE
DIAL MODE
>DIAL MODE
LCD LANGUAGE
HOME AREA CODE
---
DIAL MODE
>TONE