VTech gz5838 - Manual (Page 12)

www.vtechphones.com 2
Telephone operation
Set date and time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call . If you do not have caller ID service, the date and time can be set manually .
 . Make sure the handset is in idle mode .
2 . Press
PROG .
3 . Press or until the screen displays DATE/TIME .
4 . Press SEL . The current month blinks .
5 . Use or to adjust the month, then press SEL .
6 . Repeat step 5 to adjust the day, hour, minute and (indicates am) or (indicates pm) . There
will be a confirmation beep.
Dial mode
The dial mode is preset to touch tone . If you have touch tone service, the telephone is ready for use
as soon as the battery is charged .
If you have pulse (rotary) service, the dial mode must be changed .
 . Make sure the handset is in idle mode .
2 . Press
PROG .
3 . Press or until the screen displays DIAL MODE: and the current setting .
4 . Press SEL . The current setting blinks .
5 . Press or to select from TONE or PULSE .
6 . Press SEL to save your selection. There will be a confirmation beep.